from .....Internal.Core import Core
from .....Internal.CommandsGroup import CommandsGroup
from .....Internal.StructBase import StructBase
from .....Internal.ArgStruct import ArgStruct
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]
class StandardDevCls:
"""StandardDev commands group definition. 2 total commands, 0 Subgroups, 2 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("standardDev", core, parent)
# noinspection PyTypeChecker
[docs]
class ResultData(StructBase):
"""Response structure. Fields: \n
- Reliability: int: 'Reliability indicator'
- Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits.
- Evm_Rms_Low: float: EVM RMS value, low EVM window position
- Evm_Rms_High: float: EVM RMS value, high EVM window position
- Evm_Peak_Low: float: EVM peak value, low EVM window position
- Evm_Peak_High: float: EVM peak value, high EVM window position
- Mag_Error_Rms_Low: float: Magnitude error RMS value, low EVM window position
- Mag_Error_Rms_High: float: Magnitude error RMS value, low EVM window position
- Mag_Error_Peak_Low: float: Magnitude error peak value, low EVM window position
- Mag_Err_Peak_High: float: Magnitude error peak value, high EVM window position
- Ph_Error_Rms_Low: float: Phase error RMS value, low EVM window position
- Ph_Error_Rms_High: float: Phase error RMS value, high EVM window position
- Ph_Error_Peak_Low: float: Phase error peak value, low EVM window position
- Ph_Error_Peak_High: float: Phase error peak value, high EVM window position
- Frequency_Error: float: Carrier frequency error
- Timing_Error: float: Time error
- Tx_Power: float: User equipment power
- Peak_Power: float: User equipment peak power
- Antenna_1_Pow: float: Power at RX antenna 1
- Antenna_2_Pow: float: Power at RX antenna 2"""
__meta_args_list = [
ArgStruct.scalar_int('Reliability', 'Reliability'),
ArgStruct.scalar_int('Out_Of_Tolerance'),
ArgStruct.scalar_float('Evm_Rms_Low'),
ArgStruct.scalar_float('Evm_Rms_High'),
ArgStruct.scalar_float('Evm_Peak_Low'),
ArgStruct.scalar_float('Evm_Peak_High'),
ArgStruct.scalar_float('Mag_Error_Rms_Low'),
ArgStruct.scalar_float('Mag_Error_Rms_High'),
ArgStruct.scalar_float('Mag_Error_Peak_Low'),
ArgStruct.scalar_float('Mag_Err_Peak_High'),
ArgStruct.scalar_float('Ph_Error_Rms_Low'),
ArgStruct.scalar_float('Ph_Error_Rms_High'),
ArgStruct.scalar_float('Ph_Error_Peak_Low'),
ArgStruct.scalar_float('Ph_Error_Peak_High'),
ArgStruct.scalar_float('Frequency_Error'),
ArgStruct.scalar_float('Timing_Error'),
ArgStruct.scalar_float('Tx_Power'),
ArgStruct.scalar_float('Peak_Power'),
ArgStruct.scalar_float('Antenna_1_Pow'),
ArgStruct.scalar_float('Antenna_2_Pow')]
def __init__(self):
StructBase.__init__(self, self)
self.Reliability: int = None
self.Out_Of_Tolerance: int = None
self.Evm_Rms_Low: float = None
self.Evm_Rms_High: float = None
self.Evm_Peak_Low: float = None
self.Evm_Peak_High: float = None
self.Mag_Error_Rms_Low: float = None
self.Mag_Error_Rms_High: float = None
self.Mag_Error_Peak_Low: float = None
self.Mag_Err_Peak_High: float = None
self.Ph_Error_Rms_Low: float = None
self.Ph_Error_Rms_High: float = None
self.Ph_Error_Peak_Low: float = None
self.Ph_Error_Peak_High: float = None
self.Frequency_Error: float = None
self.Timing_Error: float = None
self.Tx_Power: float = None
self.Peak_Power: float = None
self.Antenna_1_Pow: float = None
self.Antenna_2_Pow: float = None
[docs]
def read(self) -> ResultData:
"""SCPI: READ:NRMMw:MEASurement<Instance>:PRACh:MODulation:SDEViation \n
Snippet: value: ResultData = driver.nrMmwMeas.prach.modulation.standardDev.read() \n
Return the current, average and standard deviation single value results. The values described below are returned by FETCh
and READ commands. CALCulate commands return limit check results instead, one value for each result listed below. \n
:return: structure: for return value, see the help for ResultData structure arguments."""
return self._core.io.query_struct(f'READ:NRMMw:MEASurement<Instance>:PRACh:MODulation:SDEViation?', self.__class__.ResultData())
[docs]
def fetch(self) -> ResultData:
"""SCPI: FETCh:NRMMw:MEASurement<Instance>:PRACh:MODulation:SDEViation \n
Snippet: value: ResultData = driver.nrMmwMeas.prach.modulation.standardDev.fetch() \n
Return the current, average and standard deviation single value results. The values described below are returned by FETCh
and READ commands. CALCulate commands return limit check results instead, one value for each result listed below. \n
:return: structure: for return value, see the help for ResultData structure arguments."""
return self._core.io.query_struct(f'FETCh:NRMMw:MEASurement<Instance>:PRACh:MODulation:SDEViation?', self.__class__.ResultData())