Average

SCPI Commands :

READ:NRMMw:MEASurement<Instance>:PRACh:MODulation:AVERage
FETCh:NRMMw:MEASurement<Instance>:PRACh:MODulation:AVERage
CALCulate:NRMMw:MEASurement<Instance>:PRACh:MODulation:AVERage
class AverageCls[source]

Average commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits.

  • Evm_Rms_Low: float or bool: EVM RMS value, low EVM window position

  • Evm_Rms_High: float or bool: EVM RMS value, high EVM window position

  • Evm_Peak_Low: float or bool: EVM peak value, low EVM window position

  • Evm_Peak_High: float or bool: EVM peak value, high EVM window position

  • Mag_Error_Rms_Low: float or bool: Magnitude error RMS value, low EVM window position

  • Mag_Error_Rms_High: float or bool: Magnitude error RMS value, low EVM window position

  • Mag_Error_Peak_Low: float or bool: Magnitude error peak value, low EVM window position

  • Mag_Err_Peak_High: float or bool: Magnitude error peak value, high EVM window position

  • Ph_Error_Rms_Low: float or bool: Phase error RMS value, low EVM window position

  • Ph_Error_Rms_High: float or bool: Phase error RMS value, high EVM window position

  • Ph_Error_Peak_Low: float or bool: Phase error peak value, low EVM window position

  • Ph_Error_Peak_High: float or bool: Phase error peak value, high EVM window position

  • Frequency_Error: float or bool: Carrier frequency error

  • Timing_Error: float or bool: Time error

  • Tx_Power: float or bool: User equipment power

  • Peak_Power: float or bool: User equipment peak power

  • Antenna_1_Pow: float or bool: Power at RX antenna 1

  • Antenna_2_Pow: float or bool: Power at RX antenna 2

class ResultData[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits.

  • Evm_Rms_Low: float: EVM RMS value, low EVM window position

  • Evm_Rms_High: float: EVM RMS value, high EVM window position

  • Evm_Peak_Low: float: EVM peak value, low EVM window position

  • Evm_Peak_High: float: EVM peak value, high EVM window position

  • Mag_Error_Rms_Low: float: Magnitude error RMS value, low EVM window position

  • Mag_Error_Rms_High: float: Magnitude error RMS value, low EVM window position

  • Mag_Error_Peak_Low: float: Magnitude error peak value, low EVM window position

  • Mag_Err_Peak_High: float: Magnitude error peak value, high EVM window position

  • Ph_Error_Rms_Low: float: Phase error RMS value, low EVM window position

  • Ph_Error_Rms_High: float: Phase error RMS value, high EVM window position

  • Ph_Error_Peak_Low: float: Phase error peak value, low EVM window position

  • Ph_Error_Peak_High: float: Phase error peak value, high EVM window position

  • Frequency_Error: float: Carrier frequency error

  • Timing_Error: float: Time error

  • Tx_Power: float: User equipment power

  • Peak_Power: float: User equipment peak power

  • Antenna_1_Pow: float: Power at RX antenna 1

  • Antenna_2_Pow: float: Power at RX antenna 2

calculate() → CalculateStruct[source]
# SCPI: CALCulate:NRMMw:MEASurement<Instance>:PRACh:MODulation:AVERage
value: CalculateStruct = driver.nrMmwMeas.prach.modulation.average.calculate()

Return the current, average and standard deviation single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:NRMMw:MEASurement<Instance>:PRACh:MODulation:AVERage
value: ResultData = driver.nrMmwMeas.prach.modulation.average.fetch()

Return the current, average and standard deviation single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:NRMMw:MEASurement<Instance>:PRACh:MODulation:AVERage
value: ResultData = driver.nrMmwMeas.prach.modulation.average.read()

Return the current, average and standard deviation single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.