Blimits<BandLimits>
RepCap Settings
# Range: Nr1 .. Nr2
rc = driver.configure.nrMmwMeas.multiEval.limit.aclr.nr.caggregation.blimits.repcap_bandLimits_get()
driver.configure.nrMmwMeas.multiEval.limit.aclr.nr.caggregation.blimits.repcap_bandLimits_set(repcap.BandLimits.Nr1)
SCPI Command :
CONFigure:NRMMw:MEASurement<Instance>:MEValuation:LIMit:ACLR:NR:CAGGregation:BLIMits<n>
- class BlimitsCls[source]
Blimits commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: BandLimits, default value after init: BandLimits.Nr1
- class BlimitsStruct[source]
Response structure. Fields:
Relative_Level: float or bool: Relative lower ACLR limit without test tolerance
Absolute_Level: float or bool: No parameter help available
- get(bandLimits=BandLimits.Default) BlimitsStruct [source]
# SCPI: CONFigure:NRMMw:MEASurement<Instance>:MEValuation:LIMit:ACLR:NR:CAGGregation:BLIMits<n> value: BlimitsStruct = driver.configure.nrMmwMeas.multiEval.limit.aclr.nr.caggregation.blimits.get(bandLimits = repcap.BandLimits.Default)
Defines relative and absolute limits for the ACLR measured in an adjacent NR channel, with carrier aggregation.
- param bandLimits:
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Blimits’)
- return:
structure: for return value, see the help for BlimitsStruct structure arguments.
- set(relative_level: float, absolute_level: float, bandLimits=BandLimits.Default) None [source]
# SCPI: CONFigure:NRMMw:MEASurement<Instance>:MEValuation:LIMit:ACLR:NR:CAGGregation:BLIMits<n> driver.configure.nrMmwMeas.multiEval.limit.aclr.nr.caggregation.blimits.set(relative_level = 1.0, absolute_level = 1.0, bandLimits = repcap.BandLimits.Default)
Defines relative and absolute limits for the ACLR measured in an adjacent NR channel, with carrier aggregation.
- param relative_level:
(float or boolean) Relative lower ACLR limit without test tolerance
- param absolute_level:
(float or boolean) No help available
- param bandLimits:
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Blimits’)
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.configure.nrMmwMeas.multiEval.limit.aclr.nr.caggregation.blimits.clone()